Pivot App in Control Center?

Chris Hallo
Chris Hallo ✭✭✭✭
edited 06/14/22 inAdd Ons and Integrations

早上好!Has anyone been successful in having pivots within control center that auto-update as part of the provisioning process? If they are based on dynamic scope reports?

· Share on Facebook Share on Twitter

Best Answer

  • Genevieve P.
    Genevieve P. Employee Admin
    Answer ✓

    Hi@Chris Hallo

    早上好!是的,你can create a Pivot sheet using anSCC Dynamic Scope Reportas the source. When a new project is provisioned, the Report will automatically bring in the data that you've specified based on the Report set-up and your blueprint configuration.

    Then after the Report has been updated,the Pivot will run(on your specified cadence) and it will include this new information. Keep in mind that when you're using a Report as a source for a Pivot sheet, the fastest frequency timing you can set is 1hour (there is no "update immediately" for a Report, that's only available with a source Sheet).

    Cheers,

    Genevieve

    · Share on Facebook Share on Twitter

Answers

  • Genevieve P.
    Genevieve P. Employee Admin
    Answer ✓

    Hi@Chris Hallo

    早上好!是的,你can create a Pivot sheet using anSCC Dynamic Scope Reportas the source. When a new project is provisioned, the Report will automatically bring in the data that you've specified based on the Report set-up and your blueprint configuration.

    Then after the Report has been updated,the Pivot will run(on your specified cadence) and it will include this new information. Keep in mind that when you're using a Report as a source for a Pivot sheet, the fastest frequency timing you can set is 1hour (there is no "update immediately" for a Report, that's only available with a source Sheet).

    Cheers,

    Genevieve

    · Share on Facebook Share on Twitter
  • Chris Hallo
    Chris Hallo ✭✭✭✭

    Thanks,@Genevieve P.I was getting conflicting information from someone on the Smartsheet consultant side.

    · Share on Facebook Share on Twitter
  • Genevieve P.
    Genevieve P. Employee Admin

    No problem!

    It depends on how you're using Pivot with Control Center (SCC). SCC isn't able to automatically create Pivot workflows, they don't connect in that way. However Pivot can use any Smartsheet Report or Sheet as the source, so if your Report is being automatically updated via SCC then the Pivot will eventually update, too.

    · Share on Facebook Share on Twitter

Categories

Hi @Matthew Drake<\/a> <\/p>

There currently isn't a way to overlay an Outlook Calendar on top of a Smartsheet Calendar; you can do the reverse, publish dates from Smartsheet into Outlook.<\/a><\/p>

Please provide your feedback to the Product team through this form, here.<\/a><\/p>

Thanks,<\/p>

Genevieve<\/p>"}]}},"status":{"statusID":3,"name":"Accepted","state":"closed","recordType":"discussion","recordSubType":"question"},"bookmarked":false,"unread":false,"category":{"categoryID":343,"name":"Add Ons and Integrations","url":"https:\/\/community.smartsheet.com\/categories\/apps-and-integrations","allowedDiscussionTypes":["discussion","question"]},"reactions":[{"tagID":3,"urlcode":"Promote","name":"Promote","class":"Positive","hasReacted":false,"reactionValue":5,"count":0},{"tagID":5,"urlcode":"Insightful","name":"Insightful","class":"Positive","hasReacted":false,"reactionValue":1,"count":0},{"tagID":11,"urlcode":"Up","name":"Vote Up","class":"Positive","hasReacted":false,"reactionValue":1,"count":0},{"tagID":13,"urlcode":"Awesome","name":"Awesome","class":"Positive","hasReacted":false,"reactionValue":1,"count":0}],"tags":[]},{"discussionID":91824,"type":"question","name":"Dynamic View - Dropdown Lists","excerpt":"I have certain single and multiple select list columns that do not have the \"restrict to dropdown values only\" checked on the source sheet but in Dynamic View we are unable to add in our own values if they don't exist in the dropdown. This has been extremely frustrating especially when trying to capture new values and…","snippet":"I have certain single and multiple select list columns that do not have the \"restrict to dropdown values only\" checked on the source sheet but in Dynamic View we are unable to add…","categoryID":343,"dateInserted":"2022-06-06T17:24:20+00:00","dateUpdated":"2022-06-14T14:39:36+00:00","dateLastComment":"2023-08-25T19:03:11+00:00","insertUserID":113932,"insertUser":{"userID":113932,"name":"Emmy Anderson","url":"https:\/\/community.smartsheet.com\/profile\/Emmy%20Anderson","photoUrl":"https:\/\/aws.smartsheet.com\/storageProxy\/image\/images\/u!1!jplUI_CI3bw!8o9VN1d3-no!6TkM7ozjpN6","dateLastActive":"2023-05-04T14:55:16+00:00","banned":0,"punished":0,"private":false,"label":"✭✭✭✭"},"updateUserID":91566,"lastUserID":156788,"lastUser":{"userID":156788,"name":"Chris Broughton","url":"https:\/\/community.smartsheet.com\/profile\/Chris%20Broughton","photoUrl":"https:\/\/aws.smartsheet.com\/storageProxy\/image\/images\/u!1!p0HeqRqVoXw!8_nRN9ijwLw!lUie_n6pld_","dateLastActive":"2023-08-25T18:59:04+00:00","banned":0,"punished":0,"private":false,"label":"✭✭"},"pinned":false,"pinLocation":null,"closed":false,"sink":false,"countComments":7,"countViews":569,"score":null,"hot":3347530651,"url":"https:\/\/community.smartsheet.com\/discussion\/91824\/dynamic-view-dropdown-lists","canonicalUrl":"https:\/\/community.smartsheet.com\/discussion\/91824\/dynamic-view-dropdown-lists","format":"Rich","tagIDs":[319],"lastPost":{"discussionID":91824,"commentID":392652,"name":"Re: Dynamic View - Dropdown Lists","url":"https:\/\/community.smartsheet.com\/discussion\/comment\/392652#Comment_392652","dateInserted":"2023-08-25T19:03:11+00:00","insertUserID":156788,"insertUser":{"userID":156788,"name":"Chris Broughton","url":"https:\/\/community.smartsheet.com\/profile\/Chris%20Broughton","photoUrl":"https:\/\/aws.smartsheet.com\/storageProxy\/image\/images\/u!1!p0HeqRqVoXw!8_nRN9ijwLw!lUie_n6pld_","dateLastActive":"2023-08-25T18:59:04+00:00","banned":0,"punished":0,"private":false,"label":"✭✭"}},"breadcrumbs":[{"name":"Home","url":"https:\/\/community.smartsheet.com\/"},{"name":"Get Help","url":"https:\/\/community.smartsheet.com\/categories\/get-help"},{"name":"Add Ons and Integrations","url":"https:\/\/community.smartsheet.com\/categories\/apps-and-integrations"}],"groupID":null,"statusID":3,"attributes":{"question":{"status":"accepted","dateAccepted":"2022-06-08T12:36:40+00:00","dateAnswered":"2022-06-06T18:38:56+00:00","acceptedAnswers":[{"commentID":332119,"body":"

Hi @Emmy Anderson<\/a> <\/p>

You are not missing anything. This is how DV works with dropdowns unfortunately. My work around in the past is to create an other option in the drop down, user chooses save. Then have logic built for a text field that appears so the user can input the values not present in dropdown. <\/p>

Hope this helps<\/p>"}]}},"status":{"statusID":3,"name":"Accepted","state":"closed","recordType":"discussion","recordSubType":"question"},"bookmarked":false,"unread":false,"category":{"categoryID":343,"name":"Add Ons and Integrations","url":"https:\/\/community.smartsheet.com\/categories\/apps-and-integrations","allowedDiscussionTypes":["discussion","question"]},"reactions":[{"tagID":3,"urlcode":"Promote","name":"Promote","class":"Positive","hasReacted":false,"reactionValue":5,"count":0},{"tagID":5,"urlcode":"Insightful","name":"Insightful","class":"Positive","hasReacted":false,"reactionValue":1,"count":0},{"tagID":11,"urlcode":"Up","name":"Vote Up","class":"Positive","hasReacted":false,"reactionValue":1,"count":0},{"tagID":13,"urlcode":"Awesome","name":"Awesome","class":"Positive","hasReacted":false,"reactionValue":1,"count":0}],"tags":[{"tagID":319,"urlcode":"functionality","name":"functionality"}]},{"discussionID":66594,"type":"question","name":"Is there a way to use OR in a Dynamic View filter condition?","excerpt":"In a View, I can create a custom filter that selects where the Project Lead is \"Mike\" but I want to also say \"OR Debbie.\" Is that possible? It looks like I can only choose AND.","snippet":"In a View, I can create a custom filter that selects where the Project Lead is \"Mike\" but I want to also say \"OR Debbie.\" Is that possible? It looks like I can only choose AND.","categoryID":343,"dateInserted":"2020-03-09T22:27:57+00:00","dateUpdated":"2022-06-14T14:36:49+00:00","dateLastComment":"2023-08-23T08:56:50+00:00","insertUserID":34501,"insertUser":{"userID":34501,"name":"MikeChambers","url":"https:\/\/community.smartsheet.com\/profile\/MikeChambers","photoUrl":"https:\/\/us.v-cdn.net\/6031209\/uploads\/userpics\/CT5AV825MQ3E\/nG12D47VYRO8A.jpg","dateLastActive":"2023-03-05T01:19:05+00:00","banned":0,"punished":0,"private":false,"label":"✭✭"},"updateUserID":91566,"lastUserID":8888,"lastUser":{"userID":8888,"name":"Andrée Starå","title":"Smartsheet Expert Consultant & Partner | Workflow Consultant \/ CEO @ WORK BOLD","url":"https:\/\/community.smartsheet.com\/profile\/Andr%C3%A9e%20Star%C3%A5","photoUrl":"https:\/\/us.v-cdn.net\/6031209\/uploads\/userpics\/0PAU3GBYQLBT\/nXWM7QXGD6464.jpg","dateLastActive":"2023-08-26T17:06:33+00:00","banned":0,"punished":0,"private":false,"label":"✭✭✭✭✭✭"},"pinned":false,"pinLocation":null,"closed":false,"sink":false,"countComments":9,"countViews":441,"score":null,"hot":3276579287,"url":"https:\/\/community.smartsheet.com\/discussion\/66594\/is-there-a-way-to-use-or-in-a-dynamic-view-filter-condition","canonicalUrl":"https:\/\/community.smartsheet.com\/discussion\/66594\/is-there-a-way-to-use-or-in-a-dynamic-view-filter-condition","format":"rich","lastPost":{"discussionID":66594,"commentID":392055,"name":"Re: Is there a way to use OR in a Dynamic View filter condition?","url":"https:\/\/community.smartsheet.com\/discussion\/comment\/392055#Comment_392055","dateInserted":"2023-08-23T08:56:50+00:00","insertUserID":8888,"insertUser":{"userID":8888,"name":"Andrée Starå","title":"Smartsheet Expert Consultant & Partner | Workflow Consultant \/ CEO @ WORK BOLD","url":"https:\/\/community.smartsheet.com\/profile\/Andr%C3%A9e%20Star%C3%A5","photoUrl":"https:\/\/us.v-cdn.net\/6031209\/uploads\/userpics\/0PAU3GBYQLBT\/nXWM7QXGD6464.jpg","dateLastActive":"2023-08-26T17:06:33+00:00","banned":0,"punished":0,"private":false,"label":"✭✭✭✭✭✭"}},"breadcrumbs":[{"name":"Home","url":"https:\/\/community.smartsheet.com\/"},{"name":"Get Help","url":"https:\/\/community.smartsheet.com\/categories\/get-help"},{"name":"Add Ons and Integrations","url":"https:\/\/community.smartsheet.com\/categories\/apps-and-integrations"}],"groupID":null,"statusID":3,"image":{"url":"https:\/\/us.v-cdn.net\/6031209\/uploads\/814\/KBHVAAPJ5RYA.jpg","urlSrcSet":{"10":"","300":"","800":"","1200":"","1600":""},"alt":"OR.jpg"},"attributes":{"question":{"status":"accepted","dateAccepted":"2020-03-12T17:06:46+00:00","dateAnswered":"2020-03-12T13:01:18+00:00","acceptedAnswers":[{"commentID":242817,"body":"

You are more than welcome!<\/p>

Glad to hear that it worked for your present use-case. <\/p>

✅Remember! <\/strong>Did my post help or answer your question or solve your problem? Please help the Community by <\/em>marking it as the accepted answer\/helpful<\/em><\/strong>. It will make it easier for others to find a solution or help to answer!<\/em><\/p>"}]}},"status":{"statusID":3,"name":"Accepted","state":"closed","recordType":"discussion","recordSubType":"question"},"bookmarked":false,"unread":false,"category":{"categoryID":343,"name":"Add Ons and Integrations","url":"https:\/\/community.smartsheet.com\/categories\/apps-and-integrations","allowedDiscussionTypes":["discussion","question"]},"reactions":[{"tagID":3,"urlcode":"Promote","name":"Promote","class":"Positive","hasReacted":false,"reactionValue":5,"count":0},{"tagID":5,"urlcode":"Insightful","name":"Insightful","class":"Positive","hasReacted":false,"reactionValue":1,"count":0},{"tagID":11,"urlcode":"Up","name":"Vote Up","class":"Positive","hasReacted":false,"reactionValue":1,"count":0},{"tagID":13,"urlcode":"Awesome","name":"Awesome","class":"Positive","hasReacted":false,"reactionValue":1,"count":0}],"tags":[]}],"initialPaging":{"nextURL":"https:\/\/community.smartsheet.com\/api\/v2\/discussions?page=2&categoryID=343&includeChildCategories=1&type%5B0%5D=Question&excludeHiddenCategories=1&sort=-dateLastComment&limit=3&expand%5B0%5D=all&expand%5B1%5D=-body&expand%5B2%5D=insertUser&expand%5B3%5D=lastUser&status=accepted","prevURL":null,"currentPage":1,"total":643,"limit":3},"title":"Trending Posts","subtitle":null,"description":null,"noCheckboxes":true,"containerOptions":[],"discussionOptions":[]}">

Trending Posts

  • Outlook Calendar events populating Smartsheet?

    Good morning, I have attempted to search the answer but not having much luck. My question is: The team I am apart of currently use Outlook calendars to record the various event sessions taking place throughout the day in different rooms. We have begun using Smartsheet to record the events so we can display the statistical…

  • Dynamic View - Dropdown Lists

    I have certain single and multiple select list columns that do not have the "restrict to dropdown values only" checked on the source sheet but in Dynamic View we are unable to add in our own values if they don't exist in the dropdown. This has been extremely frustrating especially when trying to capture new values and…

  • Is there a way to use OR in a Dynamic View filter condition?

    In a View, I can create a custom filter that selects where the Project Lead is "Mike" but I want to also say "OR Debbie." Is that possible? It looks like I can only choose AND.

Help shape the future of Smartsheet.
Share your ideas and feature requests.

 Watch video